Through the Eyes of an Auditor

Website https://www.compliancetrainingpanel.com/Webinar/Topic?WB=MP00114 | Edit Freely

Category Online

Deadline: October 16, 2018 | Date: October 16, 2018

Venue/Country: Online webinar, U.S.A

Updated: 2018-10-06 18:04:34 (GMT+9)

Call For Papers - CFP

Internal and external audits are an integral part of running a medical device or biotechnology manufacturing operation. To be sure, auditors must follow standards such as ISO 13485, ISO 14971, or regulations such as 21 CFR Part 820. Additionally, an auditor has personal experiences of what a state of control looks like and has visited sufficient places to know what to look for.

Anyone in a medical device setting must be prepared for an audit at any and all times. This webinar provides insight into the kinds of clues an auditor might use in determining what areas to focus on. It isn´t intended to cover all regulations and standards. What it does cover is the general mental checklist that will influence how well an audit goes, as well as the culture and environment a company´s management must encourage so that impression is a good to excellent one.

Background :

An external auditor is coming to your plant. Their first impression may have a major impact on your plant's future as well as your own career. How will your plant look to that auditor?

Before they even set foot in the door - what your grounds and outside facility says about your operation.

Approaching the production area – tell-tale signs that will influence the auditor's perception.

Your cleanroom gowning area - how the audit could be almost over before it has even started.

It's only a utility room - why would they want to look in there?

Your janitor's closet - it might as well be your front porch.

Do you follow your own rules? The auditor is noticing this very carefully - and taking notes.

Can you "put your hands on it." Documents, procedures, manuals, and reports - why five minutes may be too long to change a first impression.

Why :

An experienced auditor does not need to dig very far - he or she already has a mental checklist. You need to know what that is.

The importance of housekeeping, proper maintenance, ordeliness, and following safety rules.

The importance of visual indicators - and following them.

Utility rooms and custodial closets are often places to hide clutter. Some experienced auditors know that this tells them more about your systems than the clean and presentable areas.

How using the same logic as the auditors can help you be in a state of constant readiness.

Areas Covered in the Session :

What the auditor is looking for and why

The first five minutes

Touring the plant and manufacturing area

Entering and touring the warehouse

Entering and touring a cleanroom

Entering and touring lab areas

Reviewing documents

Reviewing the quality system

Summary

Who Will Benefit:

Managers, Supervisors, Directors, and Vice-Presidents in the areas of:

R&D

Manufacturing Engineering

Design Assurance

Quality Assurance

Operations

Document Control

About Speaker:

José Mora is a Principal Consultant and Project Manager specializing in Manufacturing Engineering, Quality Systems, and Lean Transformations. José is a recognized subject matter expert in process validation, lean manufacturing, lean controlled document systems, startup operations, process development and quality systems, having lectured internationally and presented webinars on these subjects.For over 30 years he has worked in the life sciences in positions ranging from Senior Engineer and Project Manager to Vice-President,